There's no better way to apply finishing touches to sidewalks, paths and driveways in Alton than with the FISHER® POLY-CASTER™ UTV hopper spreader. Designed to fit into the back of a UTV, the POLYCASTER UTV hopper spreader lets you easily spread salt or a 50/50 salt/sand mix where only a UTV can go. The 11 cubic foot capacity hopper comes standard with inverted vibrating V, top screen, a heavy duty steel frame and a fitted tarp cover, providing reliable performance storm after storm.
The POLY-CASTER™ UTV hopper spreader is the proper width/length, and the capacity is appropriate to meet vehicle weight requirements of most utility vehicles.
A custom fitted tarp cover helps to keep your ice control material dry and prevent clumping.
The two high-torque 12-volt electric motors provide quiet, reliable and independent control over the auger and spinner mechanisms. The spinner motor is sealed inside a weather-resistant housing, protecting it from corrosion.
Dual variable-speed control allows you to precisely match material delivery and spread patterns to conditions. A switch to run the vibrator is integrated into the control for operator convenience.
The one-piece, hopper is built of durable poly for corrosion-free performance, whether using rock salt, calcium chloride, or any other type of de-icing material.
Material is delivered by a heavy-duty steel auger. If an obstruction occurs, the transverse auger system will reduce downtime by automatically reversing until the obstruction is cleared and then normal operation will resume.
The durable 12" corrosion-free spinner delivers a spread pattern of up to 30'.
Located at the top and bottom, guards help protect the spinner from damage if the operator accidentally backs into a solid object.
Gain easy access to the hitch by removing the quick-connect spinner drive assembly.
For convenient access to the hitch, the quick-connect chute assembly can be easily removed.
An inverted V comes standard and helps keep sufficient material weight off of the auger, ensuring smooth startup and flow of material. It is directly connected to the vibrator to further reduce bridging and keep material moving to the auger.
A steel top screen comes standard, which helps break up large chunks of de-icing material during the loading process to prevent clogging and bridging during spreader operation.
Standard nylon ratchet straps provide additional in-bed stability and security. The 4,000 pound, high strength shipping straps allow you to add an extra measure of safety as you move heavy loads of salt in your UTV. (Hoppers require bolting to the UTV bed for proper operator safety.)
| 11 cu ft | |
|---|---|
| Body Side Length | 64" |
| Capacity | 11.00 cu ft |
| Hopper Construction | Polyethylene |
| Dimensions Overall (LxWxH) | 64" x 48 ½" x 27" |
| Approx. Weight (empty) | 280 lb |
| Motor | Dual Electric, 12V DC, Sealed |
| Spinner Size | 12" |
| Spreading Width | Up to 30' |
| Materials | Salt or 50/50 Salt/Sand Mix |
| Vehicle Application | UTVs |
| 11 cu ft | |
|---|---|
| Body Side Length | 1.63 m |
| Capacity | 0.31 cu m |
| Hopper Construction | Polyethylene |
| Dimensions Overall (LxWxH) | 163 cm x 123 cm x 69 cm |
| Approx. Weight (empty) | 127 kg |
| Motor | Dual Electric, 12V DC, Sealed |
| Spinner Size | 30 cm |
| Spreading Width | Up to 9.14 m |
| Materials | Salt or 50/50 Salt/Sand Mix |
| Vehicle Application | UTVs |
There's no better way to apply finishing touches to sidewalks, paths and driveways in Alton than with the FISHER® POLY-CASTER™ UTV hopper spreader. Designed to fit into the back of a UTV, the POLYCASTER UTV hopper spreader lets you easily spread salt or a 50/50 salt/sand mix where only a UTV can go. The 11 cubic foot capacity hopper comes standard with inverted vibrating V, top screen, a heavy duty steel frame and a fitted tarp cover, providing reliable performance storm after storm.
The POLY-CASTER™ UTV hopper spreader is the proper width/length, and the capacity is appropriate to meet vehicle weight requirements of most utility vehicles.
A custom fitted tarp cover helps to keep your ice control material dry and prevent clumping.
The two high-torque 12-volt electric motors provide quiet, reliable and independent control over the auger and spinner mechanisms. The spinner motor is sealed inside a weather-resistant housing, protecting it from corrosion.
Dual variable-speed control allows you to precisely match material delivery and spread patterns to conditions. A switch to run the vibrator is integrated into the control for operator convenience.
The one-piece, hopper is built of durable poly for corrosion-free performance, whether using rock salt, calcium chloride, or any other type of de-icing material.
Material is delivered by a heavy-duty steel auger. If an obstruction occurs, the transverse auger system will reduce downtime by automatically reversing until the obstruction is cleared and then normal operation will resume.
The durable 12" corrosion-free spinner delivers a spread pattern of up to 30'.
Located at the top and bottom, guards help protect the spinner from damage if the operator accidentally backs into a solid object.
Gain easy access to the hitch by removing the quick-connect spinner drive assembly.
For convenient access to the hitch, the quick-connect chute assembly can be easily removed.
An inverted V comes standard and helps keep sufficient material weight off of the auger, ensuring smooth startup and flow of material. It is directly connected to the vibrator to further reduce bridging and keep material moving to the auger.
A steel top screen comes standard, which helps break up large chunks of de-icing material during the loading process to prevent clogging and bridging during spreader operation.
Standard nylon ratchet straps provide additional in-bed stability and security. The 4,000 pound, high strength shipping straps allow you to add an extra measure of safety as you move heavy loads of salt in your UTV. (Hoppers require bolting to the UTV bed for proper operator safety.)
| 11 cu ft | |
|---|---|
| Body Side Length | 64" |
| Capacity | 11.00 cu ft |
| Hopper Construction | Polyethylene |
| Dimensions Overall (LxWxH) | 64" x 48 ½" x 27" |
| Approx. Weight (empty) | 280 lb |
| Motor | Dual Electric, 12V DC, Sealed |
| Spinner Size | 12" |
| Spreading Width | Up to 30' |
| Materials | Salt or 50/50 Salt/Sand Mix |
| Vehicle Application | UTVs |
| 11 cu ft | |
|---|---|
| Body Side Length | 1.63 m |
| Capacity | 0.31 cu m |
| Hopper Construction | Polyethylene |
| Dimensions Overall (LxWxH) | 163 cm x 123 cm x 69 cm |
| Approx. Weight (empty) | 127 kg |
| Motor | Dual Electric, 12V DC, Sealed |
| Spinner Size | 30 cm |
| Spreading Width | Up to 9.14 m |
| Materials | Salt or 50/50 Salt/Sand Mix |
| Vehicle Application | UTVs |
